RX-V473 Setting Speaker Impedance

Last Update: 06/06/2012

RX-V473 Setting Speaker Impedance


Note: This procedure will be done on the front panel.


1.    Set the unit to Standby Mode using the Power button. (Upper left corner.)

2.    While holding down Straight button, hit the Power button. Keep holding down the Straight button until you see Advanced Setup flash on the front screen or SP IMP.

3.    Once SP IMP is displayed, you can use the Straight button to select 6 ohms or 8 ohms (Default).

4.    When the proper selection is made, turn off the unit using the Power button. The settings will be reflected the next time the unit is powered on.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top