Resetting/Initializing the receiver to factory settings
Warning: This will erase all settings and return the unit to its original factory settings.
Note: This procedure is done on the front panel of the receiver only.
1. Set the unit to Standby by pressing the Power button.
2. While holding down the Straight button, press the Power button.
3. SP IMP. 8 Ohm Min (Or 6 ohm) will come up on the Front Panel.
4. Press the Right Program Arrow button repeatedly until INIT-CANCEL comes up.
5. Press the Straight Button repeatedly until INIT-ALL comes up.
6. Press the Standby button to turn off the receiver.
7. The next time the receiver is powered on, the factory settings will take effect.