RX-V675 Setting Receiver Back to Factory Settings

Last Update: 03/22/2014

Untitled Document

Setting the reciever back to factory settings


Note: This will be done on the front panel of the receiver only.


1. Set the unit to Standby Mode using the Main Zone Power button.


2. While holding down the Straight on the front panel, press the Main Zone Power button.

 

3. When SP IMP -8ohms Min or SP IMP -6ohms Min comes up on the reciever panel, let go of the straight button.


4. Press the Program Arrow Right button repeatedly to select INIT- CANCEL.

 

5. Press the Straight button repeatedly to select INIT- ALL.

 

6. Press the Main Zone Power button to turn the unit off.


7. Press the Main Zone Power button to turn the unit on and it will be at factory settings.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top