Resetting/Initializing the receiver to factory settings

Last Update: 05/26/2012

Resetting/Initializing the receiver to factory settings

 

Warning: This will erase all settings and return the unit to its original factory settings.

 

Note: This procedure is done on the front panel of the receiver only.

 

1.       Set the unit to Standby by pressing the Power button.

2.       While holding down the Straight button, press the Power button.

3.       SP IMP. 8 Ohm Min (Or 6 ohm) will come up on the Front Panel.

4.       Press the Right Program Arrow button repeatedly until INIT-CANCEL comes up.

5.       Press the Straight Button repeatedly until INIT-ALL comes up.

6.       Press the Standby button to turn off the receiver.

7.       The next time the receiver is powered on, the factory settings will take effect.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top