R-S202 Bluetooth Operations

Last Update: 10/13/2016

Bluetooth Pairing and Setup

Note: Bluetooth is enabled by default.  If none of these options work, see the
instructions at the bottom of this FAQ for instructions on turning on Bluetooth.

Also, if you leave the unit set to Bluetooth and no operations are done on it for
over 20 minutes it will power off.  

Remote Control

1.  Press the Bluetooth source button on the remote for more then 3 seconds
     to enter pairing mode.

 
 
     Pairing mode lasts for 5 minutes.
     In pairing mode, the front panel display of this unit will indicate “PAIRING,”
     and the Bluetooth indicator will blink. 

2.  Turn on the Bluetooth function on the Bluetooth device you are paring the
     receiver with. 
3.  From the Bluetooth connection list on your device select the Yamaha.  
          When pairing has been completed, the front panel display of this unit will
          indicate “COMPLETED”.
          When the Bluetooth device is connected, the front panel display of this unit
          will indicate “CONNECTED” and the Bluetooth indicator will light up.
          If you are asked for a password, enter in "0000".   

Front Panel
1.  Press and hold down the Input Left or Right arrow button for 3 seconds.  


 
          Pairing mode lasts for 5 minutes.
          In pairing mode, the front panel display of this unit will indicate “PAIRING,”
          and the Bluetooth indicator will blink.
 
2.  Turn on the Bluetooth function on the Bluetooth device you are paring the
     receiver with.
3.  From the Bluetooth connection list on your device select the Yamaha.  
          When pairing has been completed, the front panel display of this unit will
          indicate “COMPLETED”.
          When the Bluetooth device is connected, the front panel display of this
          unit will indicate “CONNECTED” and the Bluetooth indicator will light up.
          If you are asked for a password, enter in "0000".  

Option Menu

1.  Press the Bluetooth button on the remote.


 
2.  Press the Menu button. 


 
3.  Arrow Down to Pairing hit Enter to select.   

         
 
          Pairing mode lasts for 5 minutes.
          In pairing mode, the front panel display of this unit will indicate
          “PAIRING,” and the Bluetooth indicator will blink.
 
4.  Turn on the Bluetooth function on the Bluetooth device you are paring the
     receiver with.
5.  From the Bluetooth connection list on your device select the Yamaha.  


Turning on Bluetooth(On by Default)
1.  Press the Bluetooth button on the remote.


 
2.  Press the Menu button. 


 
3.  Arrow Down to Bluetooth and hit Enter to select.

    
 
4.  Arrow Down to 'On' and hit enter to select.

     
 
Bluetooth is enabled by default.  If none of these options work, see the instructions at the bottom of this FAQ for instructions on turning on Bluetooth.
Remote Control

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top