Why do I get no subwoofer output when connected to my Yamaha YSP digital sound projector?

Last Update: 02/21/2008

The YSP Bass Out settings are set to Front at the factory to optimize performance if you are not using a subwoofer. There are two ways to turn on the subwoofer output of the YSP. The easiest way is to run the Auto Setup with the microphone. This will test to see if a subwoofer is connected. The other way to turn on the subwoofer output is to manually change the setting in the YSP Setup Menu under Manual Setup/Sound Menu. The setting should be changed from Front to SWFR.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top