Setting the RX-V471/HTR-4064 back to factory settings

Last Update: 05/19/2011

Setting the RX-V471/HTR-4064 back to factory settings

Note:  This will not harm the receiver or void the factory warranty.

1.      Set the unit to Standby by pressing the Power button on the Front Panel.


power button_sm_rx-v471.jpg

 

2.     While holding down the Straight button on the Front Panel, press the Power button on the Front Panel.

 

straight_rx-v471.jpg     power button_sm_rx-v471.jpg

 

3.     SP IMP. 8 Ohm Min will come up on the Front Panel.

 

sp_imp8_rx-v471_sm.jpg

 

4.     Use the Program Arrow button to the Right to toggle to Init Cancel.

 

program button.jpg     init cancel.jpg

 

5.     Press the Straight button Twice to display INIT ALL.

 

straight_rx-v471.jpg     init_all_sm.jpg


Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top