MG124.MG166,MG206,MG24/14,MG32/14 - Use Of PFL and AFL Functions

Last Update: 12/18/2010

1) Depress the [PFL]or [AFL] buttons send the prefader audio from that channel,group or effect return to the monitor and headphone output only that channels fader will have no effect on the audio signal at this point.

2) Once the audio signal has been monitored and adjust if necessary, press the [PFL] or [AFL] button again to return it to the up position and return the mixer back to its normal opertion.


TIPS: If audio is only heard from the headphone jack or monitor outputs, check each pfl and afl to ensure they are all in the up ,unengaged position .

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top