Logic Remote With 01V96..

Last Update: 11/14/2013

          Logic Remote With 01V96.

1)      On the 01v96v2 , press the [DIO/SETUP]  button and then access the remote menu . For the remote target, choose Protools. 

2)      Now press [F1] for the MIDI/HOST page and  set the DAW to USB ports 1-2. Verify the target is Protools.

3)      Start a new session in Logic, go to preferences and control surface setup .If any device is already chosen from previous projects  it must be removed .  Install a 01v96v2 on port 1 and a second  01v96v2, channel strips only  on port 2 . When you press the remote layer button on the 01v96 mixer it should show as online   

 HINT: Please see control surface  command set for Protools in 01v96 owners manual.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top