EMX5014 and EMX5016 with external EQ's, maximizers, etc...

Last Update: 05/19/2011

1) The current emx series does not haveinsert points between the mixer section and the internal powers amplifiers .  The only way to run this type of processing is to use external powered speakers or power amps and run the processor serially connected between the top panel line level main outputs and the inputs of the power amp/powered speaker(s).
 
2) Connect 1/4 cables from the line level main outputs to the inputs of the processor.  Connect the outputs of the processor to the inputs of the power amp/powered speaker(s).

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top