EMX 212,312,512.Connecting an External Power Amp to Drive Unpowered Speakers

Last Update: 11/13/2010

EMX 212,312,512.Connecting an External Power Amp to Drive Unpowered Speakers.

 

1) To add more main speakers, connect the inputs of the power amp to the main 1/4 outputs on the front panel . The levelof these 1/4 unbalanced jacks is controlled by the [MAIN] level control which also controls the main level goin to the internal amplifiers.

 

2) To add more monitor speakers, connect the inputs of the power amp to the monitor1/4 output on the front panel . The levelof this 1/4 unbalanced jack is controlled by the [MONITOR] level control which also controls the monitor level goin to the internal amplifiers.

 

WARNING: Never connect a power amplifier to the rear panel speaker connections or damage will occur. Those connections are for unpowered speakers only.

 

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top