Connecting an External Power Amp to Drive Unpowered Speakers with the EMX212, 312 or 512

Last Update: 06/03/2011

Connecting an External Power Amp to Drive Unpowered Speakers with the EMX212, 312 or 512.

 

1. To add more main speakers, connect the main 1/4in. outputs of the front panel to the inputs of the power amp.  The level of these 1/4in. unbalanced jacks is controlled by the [MAIN]  level control which also controls the main level going to the internal amplifiers.

 

2. To add more monitor  speakers, connect the monitor 1/4in. output on the front panel to input of the power amp.  The level of this 1/4in. unbalanced jack is controlled by the [MONITOR]  level control which also controls the monitor level going to the internal amplifiers.

 

WARNING: Do not connect a power amplifier to the rear panel speaker connections or damage will occur.  Those connections are for unpowered speakers only.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top