STAGEPAS300 Adding Additional Speakers

Back to the list
Go to Product Information

Last Update: 11/13/2010

Stagepass 300 Adding Additional Speakers

1. Using shielded signal cables, connect from the 1/4 inch"Monitor" line out "L+R" jacks to the inputs of the powered speakers. The Montor out master level will control the speaker level .

2. The speakers that come with the stagepass will connect to the jacks that are labeled "Speakers". They will be connected with unshielded speaker cable.

NOTE: Additional speakers must be self-powered and will connect to the line out "L+R" jacks located to the right side of the speaker jacks. An example of this type of speaker is the MSR100.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Back to the list
Go to Product Information

Return to Top