P3500 Power Output Specifications

Last Update: 12/29/2003

The power output per channel is as follows:

  • 350 Watts into 8 ohms with less than 0.1% THD (Total Harmonic Distortion), 20Hz to 20kHz.
  • 500 Watts into 4 ohms with less than 0.1% THD (Total Harmonic Distortion), 20Hz to 20kHz.
  • 1000 Watts into 8 ohms with less than 0.1% THD (Total Harmonic Distortion), 20Hz to 20kHz when the power amplifier is in bridge mode.

CAUTION: It is recommended that the minimum load placed on the P3500 Power Amplifier should never be below 4 ohms per channel in stereo mode and never below 8 ohms in bridge mode. Loads placed on the outputs below these minimums will possibly damage the unit.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top