WARING: The following procedure will erase all effects in the USER bank. If necessary, use the “BULK OUT (ALL)”function or store user settings in the SPX2000 editor in Studio Manager to back up your data before you proceed.
1. Turn off the power. If the SPX2000 is powered-on, turn the power off.
2. Prepare for initialization. While holding down the [STORE] button, turn on the power. The Factory Preset screen will appear.
3. Initialize, Press the [▲ INC] button to initialize the SPX2000. If you decide not to initialize, press any button other than [▲ INC].