SPX2000 Reset Procedure

Last Update: 01/20/2011

WARING: The following procedure will erase all effects in the USER bank. If necessary, use the “BULK OUT (ALL)”function or store user settings in the SPX2000 editor in Studio Manager to back up your data before you proceed.

1. Turn off the power.  If the SPX2000 is powered-on, turn the power off.

 

2. Prepare for initialization. While holding down the [STORE] button, turn on the power. The Factory Preset screen will appear.

 

3. Initialize, Press the [▲ INC] button to initialize the SPX2000. If you decide not to initialize, press any button other than [▲ INC].

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top