# Formula for Determining the Maximum Peak SPL of a Speaker

Last Update: 05/25/2012

In order to determine the maximum peak Sound Pressure Level (SPL) of a speaker you will need to know the sensitivity of the speaker measured at 1W/1M, and the peak rating of the speaker. Given these specifictaions the following formula can be used to determine the maximum peak SPL:

ndB= 10 x log (P1 divided by P2)

Where

P1= Peak rating in watts
P2= Rating in watts at which sensitivity is specified. (Usually 1W)

This number should then be added to the Sensitivity rating to determine the maximun peak SPL.

EXAMPLE: A SW118IV has a sensitivity rating of 96 dB measured at 1W/1M, and a peak rating of 1000W.

ndB= 10 x log (1000W divided by 1W)
ndB= 10 x log 1000
ndB= 10 x 3
ndB= 30dB

By adding this number (30 dB) to the sensitivity (96 dB) we find that the maximum peak SPL of the SW118IV is 126 dB.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

## Contact Us

Do you need an additional help?

Return to Top