Is software monitoring supported?

Last Update: 09/30/2010

Monitoring thru the software  is possible if you use a DAW that has a software monitoring function. This can be useful for checking effects or EQ applied to the sources being recorded in real time.

* Since the thru signal from the DAW is returned to 2TR IN/USB, you can use the control to adjust the level as required.for monitoring
* When using software monitoring with the MW12CX/MW12C turn the REC switch ON, the ST switch OFF, and raise the REC OUT fader. Set MONITOR PHONE to STEREO, and set 2TR IN/USB switch to TO MONITOR.
* When using software monitoring with the MW10C/MW8CX set the 2TR IN/USB switch to TO MONITOR, and set the STEREO master fader level to 0.
* In Cubase AI 4 enable input monitoring  for each audio track.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top