MW and MG Series Mixers Drivers and Connections

Last Update: 12/23/2010

 

Here is the link for the USB audio driver.

http://www.yamahasynth.com/downloads/drivers_software/interfaces/mwc/driver/

 

Pick the operating system: Windows 7, XP,Vista 32Bit (Select the USB Audio Driver), Mac OS X(For Mac select USB Audio Driver), and Windows 7 64, Vista 64 (For Vista 64 select the 64bit USB Audio Driver)

 

1. Download it and then extract/unzip the files.

 

2. Install with the MW or MG series mixer plugged in.

 

3. After the install open Cubase AI4.

 

4. In Cubase go to:Devices/Device Set up/VST Audio System.

 

5. With VST audio system selected, select the Yamaha USB ASIO Driver driver from the ASIO pulldown.

 

6. Cubase will ask if you want the switch the driver. Press Switch.

 

7. Press OK on the Device Set up.

 

8. In Cubase go to: Devices/VST Connections

 

9. Select the input tab and check the connections. They should read:

 

 

Stereo In

Speakers

Audio Device

Device Ports

L/R

S

Yamaha USB ASIO

USB Codec 1/2

If the audio device or the device port reads "Not Connected", Left Click on Not Connected to switch to Yamaha USB ASIO under the audio device column or Left Click on the device port column the select USB Codec 1/2.

 

10. Select the output tab and check the connections. They should read:

 

 

Stereo Out

Speakers

Audio Device

Device Ports

L/R

S

Yamaha USB ASIO

USB Codec 1/2

 

If the audio device or the device port reads "Not Connected" Left Click on Not Connected to switch to Yamaha USB ASIO under the audio device column or Left Click on the device port column the select USB Codec 1/2.

 

Finally begin a new project and start recording.

 

MG102C, MG124C, MG166C, MG206C, MG82CX, MG124CX, MG166CX, MG166C-USB, MG166CX-USB, MG206C-USB, MG24/14FX and MG32/14FX

MW10C, MW8CX, MW12C, MW12CX

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top