Using MFC10 to Transmit Bank Select and Program Change Messages

Last Update: 06/23/2012

Initial Preparation:

1) Turn ON the MFC10.

NOTE: Make sure that the 2 switches in the back are set to 'NORMAL' and 'MIDI'.

2) Connect a MIDI cable from the MFC10 'MIDI OUT' to the sound source 'MIDI IN'.

3) Select the MIDI Transmit Channel for the MFC10:

     a) Press the [MEMORY EDIT] and [FC EDIT] buttons simultaneously.

 

     b) Press the [INC/YES] or [DEC/NO] buttons to select a MIDI Transmit Channel

 

EXAMPLE: ‘C 01’ for MIDI Channel 1.

     c) Press the [WRITE/EXIT] button. The LED display will flash.

     d) Press the [INC/YES] button to confirm the setting.

Transmitting Bank MSB, Bank LSB and Program Change Numbers:

 

1) Press the [FUNCTION] button to turn OFF the ‘FUNCTION’ LED.

 

2) Select a desired memory number with the foot switches.

NOTE: A total of 128 (001 – 128) memory allocations are available for storing such data. The number selected in this step will also be the Program Change Number transmitted.

 

3) Press the [MEMORY EDIT] button.

 

4) Press the [MEMORY EDIT] button repeatedly to illuminate the LED next to ‘BANK MSB’.

 

5) Use the [INC/YES] or [DEC/NO] buttons to select a desired Bank MSB number.

 

6) Press the [MEMORY EDIT] button repeatedly to illuminate the LED next to ‘BANK LSB’.

 

7) Use the [INC/YES] or [DEC/NO] buttons to select a desired Bank LSB number.

 

8) Press the [WRITE/EXIT] button.

 

9) Press the [INC/YES] button to store the settings.

 

10) Repeat steps 2 – 9 for subsequent setups.

Reference: MFC10 Owner’s Manual, p. 9, 11

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top