Assigning Program Changes Per Pedal.

Last Update: 11/14/2013

1. Select one of the pedals (1-10) and step on it to select it.

2. Press the [MEMORY EDIT] button twice to select DATA/CTRL.

3. Use the [INC/DEC] buttons to assign the program change number.

4. Press the [MEMORY EDIT] button once to select BANK MSB.

5. Use the [INC/DEC] buttons to assign the MSB Number.

6. Press the [MEMORY EDIT] button once to select BANK LSB.

7. Use the [INC/DEC] buttons to assign the LSB Number.

8. Press the [WRITE/EXIT] button once (the LED will flash).

9. Press the [INC/YES] button once to store it.

10. Repeat steps 1-9 to edit other pedals.

NOTE: The MSB / LSB / PC numbers, used in the programming of the MFC10 (steps 3, 5, and 7), are provided by the data list manual of the device the command is being sent to (i.e. if the command is being sent to a Motif XF, then the data list manual of the XF provides the numbers needed in steps 3, 5, and 7).

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top