MG Mixers Simple Generic Recording Setup to Computers with Soundcards

Last Update: 12/18/2010

ds

1. Connect the mixer's AUX SEND output to soundcard inputs

NOTE: these are the recording busses

2. Connect soundcard output jacks to the 2trk in or channel inputs to monitorback from the PC software.

3. Connect the speakers to the "CR" out of the mixer. This signal and the headphone signal are the same. To use phones only the speakers will have to be turned off . This is done on the powered speaker or power amp driving passive speakers.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top