MG8, MG8/2FX, MG10/2 Input Gain Setting

Last Update: 12/21/2010

1. While producing the maximum input sounds that the microphone is likely to receive, increase the [INPUT GAIN] control (clockwise) until the Peak LED begins flickering on the loudest sounds.


2. Reduce the [INPUT GAIN] control until the PeakLED stops flickering.


3. Adjust the Channel Volume control as appropriate to blend with the other Input Channels.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top