Extraneous Arp Sounds

Last Update: 06/13/2014

The Arp 'Accent Vel Threshold' may be set too low.

A. Performance Mode:

1. Select a Performance.

2. Press the [Edit] button.

3. Press one of the [1-4] 'Part Select' buttons.

4. Press the [F3] 'Arp Other' button.

5. Set the 'Accent Vel Threshold' value to a lower value (The lowest value works well for most applications; 'Off').

6. Press the [Store] button.

7. Press the [Enter] button.

8. Repeat this process for each Performance that is exhibiting the trouble.


B. Voice Mode:


1. Select a Voice.

2. Press the [Edit] button.

3. Press the [Common Edit] button.

4. Press the [F3] 'Arp Other' button.

5. Set the 'Accent Vel Threshold' value to a lower value (The lowest value works well for most applications; 'Off').

6. Press the [Store] button.

7. Press the [Enter] button

8. Repeat this process for each Voice that is exhibiting the trouble.

Hearing extraneous ARP sounds
unwanted arp sounds voices

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top