'Special Edition' DX7 MIDI/Sys Ex Receive

Last Update: 06/18/2014

NOTE: The Special Edition DX7 uses the same steps as the original DX7, but with the added steps found under section B.

A.

1. Press the [FUNCTION] button (TAN button, left side of DX).

2. Press the [#8] button until 'SYS INFO UNAVAIL' is displayed.

3. Press the [YES/+1] button until 'SYS INFO AVAIL' is displayed.

4. In the 'Memory Protect' section, press the 'INTERNAL' [X] button until 'MEMORY PROTECT ON' is displayed.

5. Press the [NO/-1] button until 'MEMORY PROTECT OFF' is displayed.


B.

1. Press the [Function] button again.

2. Press the Memory Switch [#12] button.

3. The display will indicate either: Function Control MIDI OMNI: On/Off or MIDI Recv Ch: **.

4. Make sure that the Recv Ch matches the Transmit channel of the sending device.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top