Programming the Internal Timer

Last Update: 07/27/2011

The Timer function enables the user to set the recorder so that it will start recording or play a file or an alarm at a specified time.

NOTE: Before programming a timer, make sure that the date and time on the unit has been set correctly (see page 58).

1) Press and hold the [MENU/ENTER] button for at least two seconds while the main screen is displayed

2) Press the VOL [+] / [–] buttons to select [COMMON MENU], then  [TIMER & ALARM], then press the [MENU/ENTER] button.

3) Press the VOL [+] / [–] buttons to select a setting item, then press the [MENU/ENTER] button. The unit displays the setting screen for the selected item. For details about each setting item, see pages 58–62.

4) To set the time press the VOL [+] / [–] buttons to highlight [ON] or [OFF], then press the [MENU/ENTER] button.

NOTE:  OFF = The Timer function is disabled. ON = The Timer function is enabled.

5) To set repeated timer functions, press the VOL [+] / [–] buttons to highlight [ONCE], [DAILY] or [WEEKLY],then press the [MENU/ENTER] button.

NOTE: ONCE = The recorder will automatically record or play back once at the programmed time.
DAILY = The recorder will automatically record or play back everyday at the programmed time.
WEEKLY = The recorder will automatically record or play back at the programmed time on the programmed day of the week.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top