Inserting Tempo Changes in Song mode on an RX11/RX15

Last Update: 12/19/2002

1) Press the [PATTERN/SONG] selector button until the red LED labeled 'SONG' is activated.

2) Press the [EDIT] button to enter Edit mode.

3) Use the [+1/YES] or [-1/NO] buttons to locate the Part where the Tempo Change is to be inserted.

4) Press the [TEMPO CHANGE] button.

NOTE: The LCD will display 'Tempo is 00 up'.

5) Use the [+1/YES] or [-1/NO] buttons to increase or decrease the tempo.

NOTE: The display shows the amount of change from the original tempo, measured in beats per minute.

6) Press the [PATTERN/SONG] button to exit Edit mode.

Reference: Owner's Manual, p.19

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top