Assigning Cartridge Voices to Instrument Keys on an RX5

Last Update: 12/19/2002

When using a Waveform Cartridge for the first time or changing to a different one, insert the cartridge into the WAVEFORM DATA CARTRIDGE slot in the back of the unit. Turn on the power and assign the voices to the instrument keys.

1)
Before turning on the power, insert the Waveform Cartridge into the WAVEFORM DATA CARTRIDGE slot in the back of the unit.

2) Turn on the power.

3) Press [KEY ASSIGN].

4) Press the [JOB] button.

5) Press the [0] button.

6) Press the [1] button.

7) Press an instrument key multiple times to see which cartridge voices can be assigned to it.

NOTE: A cartridge voice is indicated by the letters CRT (some key pads will show no cartridge voices).

8) Repeat this process for each desired instrument key until finished. The assignments done on each instrument key will be retained.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top