Enabling Sustain for a Part in Multi Mode

Last Update: 10/27/2012

1) Press the [EDIT] button.

2) On the display select a part:  '1', '2', '3' or '4'.

3) Press the [ENTER] button.

4) Use the cursor buttons  to cursor to 'Rcv Sw'.

5) Press the [ENTER] button.

6) Use the cursor down button to cursor down to  'Sustain'.

7) Turn the [KNOB] to 'ON' or 'OFF' as desired.

8) Press the [STORE] button, and then press [ENTER] twice to save the change.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top