Edit Effects on the DTX Multi 12

Last Update: 06/25/2014

1. Press the [KIT] button and select the kit to be edited.

2. Press the [VOICE] button.

3. Press the [>] button to select the VCE4 EFFECT SEND screen.

4. Press the [ENTER] button.

5. Hit a pad, then use the [<] [>] buttons to select the VCE4-1 (Variation),VCE4-2 (Chorus), or VCE4-3 (Reverb) screen.

6. Use the [-] and [+] buttons to set the send amount for each.

7. Repeat step 5 for each pad to set the desired send amounts for each pad.

NOTE: While each pad has a send amount for Chorus, Reverb and Variation effects in [VOICE] settings, global send amounts must be made in the [KIT] settings.

8. Press the [KIT] button.

9. Press the [>] button to select KIT3 EFFECTS SEND.

10. Press the [ENTER] button.

11. Use the [<] and [>] buttons to select the ChorusSend and ReverbSend displays.

12. Use the the [+] and [–] buttons to adjust the values.

13. Press the [EXIT] button.

14. Press the [>] button to locate the KIT4 VARIATION screen.

15. Press the [ENTER] button.

16. Use the [<] or [>] to select the KIT4-1 screen, and use the [–] and [+] buttons to set the desired variation category and effect.

17. Press the [>] button to select the KIT4-2 screen and select the desired VarReturn amount.

18. When all effects are set as desired press the [STORE] button to store the kit.

19. Select a user kit.

20. Press the [ENTER] button twice to execute the store.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top