Editing a Style

Last Update: 10/30/2012

NOTE: The Style part can be changed or re-recorded by first going to the 'BASIC' section of 'STYLE CREATOR', then clearing one of the 8 Auto Accompaniment Channels (Tracks) for the Style.


Selecting a Style Section:

1) Select the Style to be edited.

2) Press the [DIGITAL RECORDING] button.


3) Press the [B] 'STYLE CREATOR' button.


4) Press the [A] button and use the toggle buttons beneath the screen to select an Auto Accompaniment 'SECTION' for the Style.


Copying Parts:

If desired, copy Parts from any existing Styles into the 8 different Channels (Tracks) of the new Style. (If all Parts are to be recorded from scratch, this section may be skipped.)

1) Press the [TAB >] button to display the 'ASSEMBLY' page in the screen.

2) The [A] - [D] and [F] - [I] buttons correspond to the 8 Parts that make up the Style (RHYTHM1, RHYTHM2, BASS, CHORD1, CHORD2, PAD, PHRASE1,and PHRASE2). To select a Part in an existing Style, press one of the [A] - [D] or [F] - [I] buttons twice; the chosen Part may then be selected from any of the existing Styles, using the [A] - [J] buttons.

EXAMPLE:  The RHYTHM2 Part from the Style, '60'sGtrPop' may be used as the RHYTHM2 Part in the New Style.

3) Press the [EXIT] button to return to the 'ASSEMBLY' page.

4) Repeat steps 2 - 3 for the remaining 7 Parts of the Style, if desired.

5) Press the [BACK] button to return to the 'BASIC' page.

Recording an original Part onto a Channel:

1) Press the [F] 'REC CH' button to display the 8 Record Channels in the screen.

2) Hold down the [J] DELETE' button and then press the [^] toggle button above the Channel to be recorded over.

3) Hold down the [F] 'REC CH' button, while pressing the [v] toggle button below the Channel to be recorded over.

4) Select a Voice or Drum Kit for the Channel by first pressing the [^] toggle button below it, and then using the [A] - [J] and toggle buttons to make a selection.

5) Press the [EXIT] button to return to the 'BASIC' screen.

6) Press the black [START/STOP] button in the 'STYLE' section of the front panel. Recording begins and the Metronome click is heard.

7) Play the desired Part on the keyboard.

8) When finished, press the black [START/STOP] button again.

9) Repeat steps 2 - 8 to record other Channels.

10) When finished recording all Channels, press the [EXIT] button once to return to the original 'BASIC' screen view.

Saving the User Style:

1) Press the [I] 'SAVE' button to select a destination for storing the User Style.

2) Use the [BACK] and [NEXT] buttons to display the 'USER' or CARD' page.

3) Press the '6' [v] toggle button to name the User Style.

4) Use the toggle buttons to select the characters for the User Style name.

5) When finished, press the '8' [^] 'OK' toggle button. The User Style is now saved.

6) Press the [EXIT] button twice to return to the 'MAIN' screen.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top