DX7 - Factory Reset

Last Update: 10/29/2014

1. Insert ROM 3 cartridge (ROM#1 outside the USA) into the cartridge slot.

NOTE: If you are in the USA and you do not have a ROM 3 cartridge, please call Yamaha at 714.522.9000 and ask if you can borrow one.

2. Press the [MEMORY PROTECT INTERNAL] button. The display will indicate MEMORY PROTECT INTERNAL ON (default is on when the DX7 is powered up).

3. Press the [-1/NO] button to toggle the Memory Protect to OFF.

4. Press the [FUNCTION] button.

5. Press the #[16] button for LOAD. The display will prompt, LOAD MEMORY -ALL OF MEMORY?

6. Press the [+1/YES] button. The display will prompt, LOAD MEMORY ARE YOU SURE?

7. Press the [+1/YES] button. The display will indicate COMPLETED.

8. Press the [MEMORY PROTECT INTERNAL] button again.

9. Press the [+1/YES] button.

DX7 DX-7

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top