Assigning the Autoload Function Motif Classic

Last Update: 11/07/2013

1) Press the [FILE] button.

2) Press the [F1] button.

3) Press the [SF1] button.

4) Turn the dial so current says 'Card'. 

5) Press the [F2] button and turn the dial so type says 'All'

6) Use the cursor buttons underneath the dial to cursor to the space underneath 'Type All'.

7) Use the cursor buttons to name the file 'Autoload' and press the [ENTER] button.

8)  Press the [UTILITY] button.

9) Press [F1] button

10) Press the [SF4] button.

11)  Cursor to Autoload and turn the dial to set Autoload to 'ON'.

12) Press the [SF5]button (to register the current location on the card as the place to load the AUTOLOAD file from).

13) Turn the Motif off then back on and your AUTOLOAD All file should load each time.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top