Motif XS Motif XF - Setting up the Editor

Last Update: 12/09/2010

NOTE: This procedure is done after download, installing, and running the Editor from Studio Manager.

1. Double click on the XS icon.

2. Once the Editor comes up, go to 'file'.

3. Select 'set up'.

4. Set 'Data Port' to USB, make sure it’s ‘ON’.

5. Set MIDI ‘In’ and ‘Out’ port 1 to Yamaha Motif - XS - 01.

6. Set MIDI ‘In’ and ‘Out’ port 4 to Yamaha Motif - XS - 04.

NOTE: Auto sync settings can be off, this is optional.

7. Leave the Device number at 1.

8. Click 'ok'.

9. Now click the green 'OFFLINE'.

10. Confirm these settings here, which are the same as steps 16-17).

11. Click 'start'.

12. Once the screen disappears editing can start.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top