Motif XF, Motif XS - Assigning Rotary Effect to a Foot Controller

Last Update: 10/24/2012

NOTE: Assigning Rotary (or any effect) to the FC pedal is a 3 step process.

(1) Setting changes in UTILITY.


(2) Editing the voice (Voice mode)to be used in the Performance.

(3) Inserting that voice in a Performance.


In UTILITY:
1. Press the [F5] button

2. Press the [SF3] button

3. Assign which ever FC to be used (1 or 2) to #04

NOTE: Either can be used, but the setting in step 3 is based on which FC port the pedal is plugged into.

4. Press the [STORE] button


In VOICE MODE:
1. Press the [EDIT] button


2. Press the [F4] button


3. Assign source to the foot controller being used (the same FC as step 3 under UTILITY MODE).


4. Assign the destination to either INSA or B


NOTE: Assign INSA or B, but not both.

5. Assign depth to +63

NOTE: Step five is an optional setting, and you’ll need to play around with this setting later, but +63 is good place to start.


6. Press the [F6] button


7. Press the [SF1] button


8. Set the effect category (below) to T&R
.
ecat


9. Set the effect type (below) to Rotary Speaker
.
etype


10. Press the [SF2] and edit the INSA ([SF3] for INSB if insert B was used) rotation parameters


NOTE: Step 10 is optional.

11. Store and use this voice



In PERFORMANCE MODE:


NOTE: This procedure is done AFTER initializing the Performance:


1. Press the [EDIT] button

2. Select a part the voice is going to be used on.

NOTE: Part access uses buttons 1-4 of the 1-16 button panel.

3. Press the [F1] button.

4. Press the [SF1] button.

5. Set PARAM. with Voice to ON.

6. Press the [STORE] button.

7. Press the [ENTER] button.

8. Press the [YES] button.

9. Press the [EDIT] button (the XF returns to the main screen after the store procedure).

10. Assign the custom USR to BANK.

11. Assign the custom voice number to NUMBER.

NOTE: (i.e. if the rotary edited voice was stored in Bank USR2:015, then assign BANK to USR2 and the NUMBER to 015).

12. Press the [STORE] button.

13. Press the [ENTER] button
.

14. Press the [YES] button.

Motif XF, Motif XS

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top