Assigning the Mod Wheel Functionality to Foot Control (Per Voice).

Last Update: 01/09/2014

Assigning the foot control to the mod wheel.

1. Press the [UTILITY] button
.

2. Press the [F4] button
.

3. Press the [SF1] button
.

4. Assign FC1 to ModWheel
.

5. Press the [STORE] button
.

Selecting a voice to assign volume to the foot controller.


1. Press the [EDIT] button
.

2. Press the [COMMON] button
.

3. Press the [F4] button
.

4. Press the [SF1] button
.

NOTE:
SF1 thru SF3 can be used. If one of the screens already has MW(01) assigned to source, then use that one.


5. Assign source to FC1(01)
.

6. Assign the destination (i.e. to volume
).

7. Set depth to +63
.

8. Press the [F2] button
.

9. Set the volume to 0
.

10. Press the [STORE] button and assign it to a user bank you can find later (i.e. H16)
.

11. Press the [ENTER] button twice
.

12. Once editing is finished, press the [STORE] button.

13. Press the [ENTER] button twice.


MOX6 MOX8

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top