MOX6, MOX8 - Copy Pattern Common Parameters to Another Pattern
1) Access [PATTERN] Mode
2) Select the pattern to be copied to
3) Press [MIXING]
4) Press [JOB]
5) Press [F3] COPY
6) Press [SF1] PART
7) Enter the pattern number you want to copy from
Note: By default, the "copy" pattern will be represented by "--" (Current). This parameter should be changed to the pattern number you want to copy from.
Note: The copy "type" should be set to "Common" for both "type" parameters
8) Press [ENTER] to execute and [ENTER] again to confirm
9) Press [STORE] to store your changes
