Creating a Layer/Split on the Mox6, Mox8
***We recommend starting with an initialized performance for this tutorial.
1 First, press the [PERFORM] button.
2 Press [JOB]
3 Press the [ENTER] button twice to initialize the performance.
Creating a Layer/Split
1 After initializing the performance press the [EXIT] button to go back to the main performance screen.
2 Press [F2] for voice.
3 With an Initial Performance one voice will be selected on Part 1. To add voices to parts 2,3, and/or 4 cursor down to each part and push the [INC] button.
4 To select a custom voice for each part cursor to that part and push the [CATEGORY SEARCH] button to choose a voice then the [ENTER] button to return to the previous screen.
***NOTE: all selected voice will be layered at this point of the procedure. Continue to split the voices.
5 To select the note range for the upper side of the keyboard hold [SF4] for “LIMIT L” then press a key to indicate the split point for the upper side of the keyboard.
6 To select the note range for the lower side of the keyboard hold [SF5] for ‘LIMIT H” then press a key to indicate the split point for the Lower voice.
***NOTE: be sure to store your settings to a USER Performance by pressing the [Store] button.
Mox, mox6, mox8, layer, split, layer/split, performance, 2 sounds, splitting two sounds, layering two sounds, splitting two voices, layering two voices, mox