MOX6, MOX8 - Copy a Performance to Song Mode

Last Update: 10/26/2012

1. Press the [SONG] button

2. Press the [MIXING] button


3. Press the [JOB] button


4. Press the [F3] button


5. Presss the [SF3] button


6. Select a performance (i.e. if perf was stored in USER1 15, then select USER1:015)


7. Select desired boxes (i.e. if the perf had reverb and chorus, then the rev and cho boxes need to be checked).


8. Select a MIX PART destination (i.e. tracks 1-4)


9. Press [ENTER] twice.


NOTE: If using 1-4, tracks 2-4 have been layered (midi channels set to 1), so all parts can only be heard on track 1. If 5-8 are used, then the result  can only heard on track 5
.

Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top