Turning On the Arpeggio Switch For Both Parts

Last Update: 01/21/2014

1) Select the first voice by pressing the desired category: such as [PIANO] , [STRINGS], etc.

2) Turn the [DIAL] to select the voice.

3) Press the [SHIFT] button, then press the [ARP] button to turn the Arp switch on for part one.

4) Turn the [DIAL] so the switch says 'on'.

5) Press the [EXIT] button three times.

6) Move the cursor down to the second part.

7) Select the second voice by pressing the Category button.

8) Turn the [DIAL] to select the second voice.

9) Press the [SHIFT] button, then press the [ARP] button.

10) Turn the [DIAL] so the switch says 'on'.

11) Press the [STORE], [ENTER] & [YES]  buttons to save the change.


Was this answer helpful?

Thank you for your feedback!

Thank you for the opportunity to serve you. It is possible that we have another article that will address your issue better.
Please click here to see additional articles, or click here to contact our tech support team.

Contact Us

Do you need an additional help?

Return to Top