1. Press the [VOICE] button.
2. Choose a Voice.
3. Press the [F6] button.
NOTE: Bank can remain at Pre, but when selecting a Ctgr (category), select one based on which voice was selected earlier. (i.e. if a drum voice was selected, then DrPc would be a good Ctgr to start for drums).
4. Set Switch to ‘ON’.
TIP: The HOLD option (same screen) is used to keep the Arp running when the keys are released.
5. Move down and select a Type.
NOTE: At this point pressing the key(s), for the assigned part, triggers the Arp.
NOTE: This concludes assigning Arps to a Voice. Continue editing the other parameters of the Voice, then store it when finished.
Do you need an additional help?